Guitar Amps
The Elusive Overdrive Amp
Overview
The Elusive Overdrive Amp is a 6V6 or 6L6 tube, solid state rectified, class AB amplifier. It has a all the classic controls of the imfamous amp. This is the one amp to spoil you from other amps. Blackface style cleans with an overdrive that ranges from mild to wild. It is literally the swiss army knife of tube guitar amplifiers. It is a hand built turret board with select components, custom made chassis, and custom Heyboer transformers. It has 4,8 and 16 ohm output tap switch and jacks. The amp is offered as a head. The cabinets are all hand built in house. It does smooth and punchy bass tones. Base price starts at $2799.99.
Specifications
- Amplifier Class: Class AB, Fixed biased
- Wattages: 24 watts, 50 watts, or 100 watts
- Channels: One
- Controls: Volume, bright, mid boost, rock/jazz, treble, mid, bass, overdrive level and ratio, master, presence, and overdrive trim. Effects loop and footswitch for overdrive and preamp mid boost. 4, 8 and 16 ohm output switch with main and extention cab output jacks.
- Preamp tube: 12AX7 (3)
- Output tube:24 watt 6v6 (2), 50 watt 6L6 (2)
- Rectifier: Solid State
- Circuit board: 1/8" GPO-3 fiberboard with turrets
- Transformers: Custom wound Heyboer Transformers
- Chassis: Custom built 0.90 aluminum
- Cabinet: Custom built 3/4" Birch plywood (Head)
- Dimensions:
- Shipping weight: 30 lbs.
- Pricing: $2799.99 for 24 or 50 watt (Head) , $2999.99 for 24 or 50 watt (Combo)
The King Richard
Overview
The King Richard is a EL84 based, tube rectified, class A amplifier. It has a master volume, brite, 5 position rotary Tone and Volume with Hi and Low inputs on the EF86 channel and Master volume, brightness, Treble, Bass and Volume with Hi and Low inputs on the 12AX7 channel. The channels are jumpable and blendable like a plexi. It is a hand built eyelet board with select components, custom made chassis, and custom Heyboer transformers. It has 4,8 and 16 ohm output taps. The cabinets are all hand built in house. It does sweet British clean and overdriven tones with jumpable channels. Base price for a head is $2799.99 map.
Specifications
- Amplifier Class: Class A, Cathode biased, push pull
- Wattage: ~45watts
- Channels: Two; One 12AX7 Channel, One EF86
- Controls: Master, Hicut, Tone (Rotary 5 position), and Volume (EF86 Channel). Master, Brite, Treble, Bass and Volume (12AX7 Channel). Hi and Low Inputs.
- Preamp tube: 12AX7 (2), 12AT7 (1), EF86 (1)
- Output tube: EL84 (4)
- Rectifier tube: 5AR4 (1)
- Circuit board: 1/8" GPO-3 fiberboard with turrets
- Transformers: Custom wound Heyboer Transformers
- Chassis: Custom built 0.90 aluminum
- Cabinet: Custom built 3/4" Birch plywood (Head)
- Dimensions: 22"L x 9.5"H x 7.75" D
- Shipping weight: 35 LBS.
- Pricing: $2799.99 (Head)
- Custom options available
The Hot Mama
Overview
The Hot Mama is a EL84 based, tube rectified, class A amplifier. It has a master volume, tone and volume with high and low inputs. It is a hand built eyelet board with select components, custom made chassis, and custom Heyboer transformers. It has 4,8 and 16 ohm output taps. The amp is offered as a head or a 1x12 combo. The amps and cabinets are all hand built in house. The Hot Mama is based on british 15 and 18 watt circuits. It has the ability to do all the chiming clean tones and also has overdrives that are not brittle or harsh. So it really is the best of both worlds in its class. It also has an interactive master volume that doesn't color the tone. The master works interactively with the volume to give volume controlled overdrives which make it a great recording amp. But that's not all. It has the ability to get really loud . So there are no problems getting above the drums in live situations. We have producers using this amp in the studio, worship guitarists using them in church, and guitarists playing them live on big stages! So it is very versatile amp in a size that is very portable. So the Hot Mama doesn't break the bank or your back! Base price for a head is $1699.99 map.
Specifications
- Amplifier Class: Class A, push pull, Cathode biased
- Wattage: ~18 watts
- Channels: One
- Controls: Volume, Tone, Master Volume, Inputs High and Low
- Preamp tube: 12AX7 (1), EF86 (1)
- Output tube: EL84 (2)
- Rectifier tube: 5AR4 (1)
- Circuit board: 1/8" GPO-3 fiberboard with eyelets
- Transformers: Custom wound Heyboer Transformers
- Chassis: Custom built 0.90 aluminum
- Cabinet: Custom built 3/4" Birch plywood (Head), 3/4" Birch or Pine plywood (Combo)
- Speaker: WGS ET65 12", 8 or 16 Ohm (Combo)
- Dimensions: 9" H x 18" W x 7 3/4" D
- Shipping weight: 27 lbs. (Head), 40 lbs. (Combo)
- Pricing: $1799.99 (Head), $1899.99 (Combo)
- Custom options available
Double Dee Tweed Amp
Overview
The Double Dee is a 6V6 based, tube rectified, push/pull amplifier. The control consists off a volume. It was built because of our love of 50's tweed deluxes. It is based off of a 5E3 circuit. But its also based off of a D style modded tweed deluxe. So it has clean and overdriven tones that are waaaay more than just a 5E3. It pushes around 18 watts and can hold its own over a drummer. It is a hand built eyelet board with select components, custom made chassis, and custom Heyboer transformers. It has two inputs and an 8 ohm output. The amp is offered as a 1x12 combo. The amps and cabinets are all hand built in house. It has more clean headroom than you would expect as well as more overall volume. So it does chicken picking to texas blues in a small size that works for bedroom, studio or stage. Base price for a combo is $1899.99.
Specifications
- Amplifier Class:, Class A, cathode biased, push pull, single channel
- Wattage: ~18 watts
- Controls:
- Preamp tube: 12AX7 (2)
- Output tube: 6V6 (2)
- Rectifier tube: 5AR4 (1)
- Circuit board: Traditional Blackface style fiberboard with eyelets
- Transformers: Custom wound Heyboer Transformers
- Chassis: Custom built 0.80 steel
- Cabinet: Custom built 3/4" solid Pine(Combo)
- Speaker: WGS ET65 12", 8 Ohm or Jensen P12Q 12" 8 Ohm
- Dimensions:
- Shipping weight: 32 lbs.
- Pricing: $1899.99 (1x12 Combo)